Fiber optical Ethernet network switch 2 fiber ports and 6 RJ45 ports

1. 2 fiber ports and 6 RJ45 ports. 2. 10/100M autoadaptive. 3. dual/single fiber optinal. 4. distance 20-120KM.

1. In conformity to IEEE 802.3 10 Base-T standard.

2. In conformity to IEEE 802.3u 100 Base-TX/FX standard..

3. Supports 1K capacity MAC address table..

4. IEEE802.3 X for full duplex and back pressure flow control for half duplex.

5. Automatically identifying the through line and cross wire.

6. Forward 1552/1536 bytes packets for management..

7.  LED indicator to show the device’s work status.

8.  In conformity to safety code of FCC and 15 CLASS A and CE MARK.

	10/100M Fiber Switch(2FO+6RJ45 Ports)
Operating standards	IEEE 802.3 10 Base-T standard, IEEE 802.3u 100 Base-TX/FX standard..
MAC address table	1K
Connector	UTP: 6RJ-45,10/100Mbps     Fiber slot: 2 SC/ST/SFP 100Mbps
Cable	UTP: Cat.5 or 6 UTP(the max distance up to 100m) Multimode Fiber: 50/125,62.5/125μm(the max distance up to 224/550m) Singlemode Fiber: 8/125,8.7/125,9/125μm(the max distance up to 10~120 km)
Flow control	Full Duplex: IEEE802.3x flow control Half Duplex: back pressure flow control
LED	PWR,F1 Link/Act,F2 Link/Act; TP1~TP6 Link/Act,TP1~TP6 100;
Power Requirement	AC220V(100-240V),50~60Hz;  DC: 5V,1A
Environmenta Temperature	0 ~ +60°C
Humidity	5% ~ 90%

This range include single fiber and dual fiber switches, and 20km, 40km, 60km etc.

Fiber optical Ethernet network switch 2 fiber ports and 6 RJ45 ports